Build your own Lowther Acousta 115/116
The Acousta 115 was first released in 1962 and was the speaker of choice of Jimi Hendrix. The 116 is the same core design as the 115 but offers a few small improvements to the build. The Acousta range of cabinets was first introduced for the PM6A in the 1950's. We rate this speaker as an intermediate difficulty build. Like all our designs there are a few complicated angles to cut and sealing the cabinet is very important.
If cutting the wood and its complex angles is going to be an issue we have a kit-pack option for you. Our kit-packs are boxed and delivered to your door with every part pre-cut to precision.
If you are worried about your ability to effectively seal the cabinet then we recommend the Lowther EX3 as a drive unit of choice.
Material and finishing guidance
We recommend building your speaker out of high-grade MDF or baltic birch plywood. Choose MDF if you are not planning on veneering your speaker and painting it instead. To get a nice glossy finish when painting we recommend using a water based pigmented lacquer with an 80% sheen level.
Fill in the form below to get access to the downloadable plan for free and get your personalised quote for everything else.
We ask for your information so we can support you as much as possible in your Lowther speaker build. We know you might have more questions (e.g. best drive unit for your amplifier) and we can answer these when we are in contact with you.