Build your own Lowther Academy

The Lowther Academy was first released as part of a new generation of Lowther Loudspeakers in the 1990's. This popular loudspeaker provides a smooth, even response and a natural bass.

The clarity and sense of location makes The Academy stand apart from its peers. It uses two drive units, the second of which is mounted in the upper section of the cabinet allowing the sound to radiate upwards and outward, this gives the listener a very unique sense of scale.

Due to the complexity of the labyrinth and size of this cabinet we have rated this an advanced cabinet to build. However, with some time and care taken in construction, The Academy will not disappoint.

If cutting the wood and its complex angles is going to be an issue we have a kit-pack option for you. Our kit-packs are boxed and delivered to your door with every part pre-cut to precision.

If you are worried about your ability to effectively seal the cabinet then we recommend the Lowther EX3 as a drive unit of choice.

Material and finishing guidance
We recommend building your speaker out of high-grade MDF or for the best sound then use baltic birch plywood. Choose MDF if you are not planning on veneering your speaker and painting it instead. To get a nice glossy finish when painting we recommend using a water based pigmented lacquer with an 80% sheen level.

Fill in the form below to get access to the downloadable plan for free and get your personalised quote for everything else.

We ask for your information so we can support you as much as possible in your Lowther speaker build. We know you might have more questions (e.g. best drive unit for your amplifier) and we can answer these when we are in contact with you.