header
   
 

The drawings listed below are available from this page.

The Lowther designs feature a single drawing from the complete set and are shown to give a potential constructor an impression of the enclosure's complexity. Full sets of plans are available from Lowther Loudspeaker Systems Ltd. There is a charge for plans, but they are free of charge if requested when drive units are ordered. Otherwise they are chargeable in accordance with the price list. Plans are available separately on paper or floppy disk, or the complete set of Lowther plans are available on C.D. See Price List for details.

The Independent Enclosure Designs are included on this page by kind permission of the designers. Paper, Floppy Disk or CD versions are not available from Lowther. Lowther Loudspeaker Systems has not tested any of these designs and cannot guarantee the performance of any design that is not of Lowther origin. Please refer to the designers if you have specific questions about their designs.

To avoid unnecessary clutter, if you wish to print these pages, there are no return links.

The Lowther designs will open in a new frame. If you wish to print the page, set your printer's page set-up to 'Landscape' or 'Wide'. To continue browsing, close this frame when you are ready to return to this page.

Independent designs will open in the main 'content' frame; please use your browser's 'Back' facility to return to this page when you are ready. If you wish to print the page, set your printer's page set-up to the appropriate format for the drawing you wish to print. Remember to select the frame containing the drawing and then print only the selected frame. Some drawings are in zipped format, and will require downloading and unzipping before they are viewable.

You may also wish to de-select any 'headers' and 'footers' in your browser's 'Page Set-up' prior to printing.

Lowther Enclosure Designs
Academy
Accolade 2
Accolade 4
Acousta 115
Acousta 124
Audiovector
Bicor 200
Bicor 2000
Fidelio
TP1 Isis
TP1 (Original)
Opus 1
Independent Enclosure Designs
Andreas Mau
Mauhorn IV
Mauhorn IV Reflector Table
Mauhorn XI
Mauhorn XII (14 drawings in a 'zip' file.)
Signature One (13 drawings in a 'zip' file.)
Signature Two (21 drawings in a 'zip' file.)
 
Jan Hedlund
Hedlund Horn (5 drawings in .pdf format in a 'zip' file.)
 

RECOMMENDED DRIVE UNITS

The following drive units can be used in the enclosures specified. These are listed in order from suitable budget drive units to those recommended for optimum performance.

FIDELIO (1 Drive Unit per Enclosure)
PM2C
DX2
EX2
DX3
EX3
EX4
ACADEMY (2 Drive Units per Enclosure)
PM2C
DX2
EX2
DX3
EX3
EX4
ACCOLADE 2 (1 Drive Unit of each type per enclosure)
PM6C and C45
DX2 and DX45
DX3 and DX55
ACCOLADE 4 (2 Drive Units of each type per enclosure)
PM6C and C45
DX2 and DX45
DX3 and DX55
ACOUSTA 115 (1 Drive Unit per enclosure)
PM6C
DX2
PM6A
DX3
DX4
ACOUSTA 124 (2 Drive Units per enclosure)
PM6C
DX2
PM6A
DX3
DX4
BICOR 200 (1 Drive Unit per enclosure)
PM6C
DX2
DX3
EX3
EX4
BICOR 2000 (2 Drive Units per enclosure)
PM6C
DX2
DX3
EX3
EX4
TP1 ORIGINAL (1 Drive Unit per enclosure)
DX4
EX4
TP1 ISIS (1 Drive Unit per enclosure)
PM2C
EX4
AUDIOVECTOR AUDITORIUM (1 Drive Unit of each type per enclosure)
EX4 and DX3
PM4 and PM2A
PM4 and PM5
 

Specifications subject to amendment without prior notice where design developments permit advancement.

Designed, made in England and distributed world-wide by:

LOWTHER LOUDSPEAKER SYSTEMS. P.O. Box 184, Sidcup, Kent DA14 4NL, ENGLAND.

If you arrived at this page via a search engine, please use this link to go to Lowther's Home Page