C Series Page Header
   
ABRIDGED SPECIFICATIONS
C45 PM6C PM2C
  PM45C Drive Unit PM6C Drive Unit PM2C drive Unit
Overall Diameter 17.4 cm 22.5 cm 22.5 cm
Overall Depth 5.6 cm 7.6 cm 7.8 cm
PCD Mounting Centres 15.6 cm 20.8 cm 20.8 cm
Baffle Hole cut-out 14 cm 19 cm 19 cm
Voice coil diameter 3.9 cm 3.9 cm 3.9 cm
Voice coil impedance (nominal) 8 or 15 ohm 8 or 15 ohm 8 or 15 ohm
Air gap width 1 mm 1 mm 1 mm
Magnet type Feroba 2 Feroba 2 Feroba 2
Flux density (I Tesla=10,000 Gauss) 1.75 Tesla 1.75 Tesla 2.1 Tesla
Magnet Ring Diameter 120 mm 120 mm 152 mm
Diaphragm Twin Paper Twin Paper Twin Paper
Frequency response 80 Hz-20kHz 30 Hz-20kHz 30 Hz-22kHz
Sensitivity at 1m/1kHz/1 watt 93 db 95 db 97 db
Maximum voice coil travel ± 1 mm ± 1 mm ± 1 mm
Resonant Frequency - Fs 60 Hz 36 Hz 36 Hz
Electrical Q - Qes 0.291 0.291 0.291
Mechanical Q - Qms 2.074 4.128 4.128
Total Q - Qts 0.255 0.272 0.272
Compliance Volume - Vas 45.44 litres 62.25 litres 62.25 litres
Emissive Piston Area - Sd 0.01055 Sq metres 0.0210 Sq metres 0.0210 Sq metres
Voice Coil DC Resistance - Re 7.1 or 13 ohm DC 7.1 or 13 ohm DC 7.1 or 13 ohm DC
Reference Efficiency - No 3.5% 3.5% 3.5%
Shipping weight 2.75 kg 3.0 kg 4.0 kg

Please email us if you require any further technical information.


Despatch of drive units, ex-works, worldwide, is within 7 working days of receipt of payment.


Specifications subject to amendment without prior notice where design developments permit advancement.

Designed, made in England and distributed world-wide by:

LOWTHER LOUDSPEAKER SYSTEMS. P.O. Box 184, Sidcup, Kent DA14 4NL, ENGLAND.

If you arrived at this page via a search engine, please use this link to go to Lowther's Home Page